Wood crafts manufacturers tell you how to make crafts

2020-12-23 635

How to make wood crafts?


1. Material selection and sketching: select the required board, the scale is appropriate, and leave the joint of tenon and tenon, and the surface should be smooth and lubricated. If you need to widen the seam, you have to stick it tightly before you can use it. Put the drawing on the board and align the right and left sides. If there are defects in the wood, such as knots and holes, try to avoid the carved parts and stay in the carved parts. The pictures are usually placed on the finished board and printed on the wood with scribble paper. You can also draw a rough line first and then carve with the painting.


2. Rough blank making: after printing the drawing sample on the board, the rough blank is formed by sawing, planing, shoveling and other things.


3. Summary of saw: if it is a through carved picture, it should be drilled with a wood drill first, and then penetrated with a wire saw. After sawing out the summary line, it can be chiseled.


4. Chiseling: in the process of chiseling, a wooden mallet is usually used to knock the round shovel to chisel out the fixed curve and generalization, and to excavate the processing part.


Shovel cutting: chisel out fixed curve and saw out general line to shovel cutting. Flat shovel cutting requires the wood surface to leave trace edge, keep flat and line circulation. The petals, cloud patterns and palindromes cut by shovel should be shoveled out layer by layer according to the size of the backhoe. Through and through carving should be done with a backhoe or a raised head round shovel, and the carving must be prevented from damage during the processing.


6. Carving: carve lines with carving knife, and carve with flat spade and round shovel with different width, veins on flowers and leaves, clothing patterns, animal body patterns, dragon whiskers of dragon head, and special tools such as fat beard knife. How to make wood crafts?


1. Material selection and sketching: select the required board, the scale is appropriate, and leave the joint of tenon and tenon, and the surface should be smooth and lubricated. If you need to widen the seam, you have to stick it tightly before you can use it. Put the drawing on the board and align the right and left sides. If there are defects in the wood, such as knots and holes, try to avoid the carved parts and stay in the carved parts. The pictures are usually placed on the finished board and printed on the wood with scribble paper. You can also draw a rough line first and then carve with the painting.


2. Roughing: after printing the drawing sample on the board, use saw, planer, shovel and other things to make a rough rough rough.


3. Saw generalization: if it is a openwork picture, it should be drilled out with a wooden drill first, and then cut with a wire saw after sawing out the outline line.


4. Chiseling: in the process of chiseling, a wooden mallet is usually used to knock the round shovel to chisel out the fixed curve and generalization, and to excavate the processing part.


  木工艺品厂家


5 spading: fixed curve chiseling, general line sawing can be carried out, flat spading requires that the surface of the wood shoveled out leave traces of edges, keep flat, lines flow. The petals, cloud patterns and palindromes cut by shovel should be shoveled out layer by layer according to the size of the backhoe. Through carving should be done with backhoe or round shovel, and damage to the carving parts must be prevented in the process of processing.


6. Carving: carve lines with carving knife, and carve with flat spade and round shovel with different width, veins on flowers and leaves, clothing patterns, animal body patterns, dragon whiskers of dragon head, and special tools such as fat beard knife.


Article source: wood crafts manufacturers www.muziwood.com


Recommended news